Short answer
A beginner needs just three things: a pair of hi-hats, one crash cymbal and one ride. Buying them as a pack from a reputable maker is usually the simplest way to start. Cymbals can’t be tuned the way drums can, so the choice you make has a lasting effect on your kit’s sound, and it’s worth playing them in a store if you can.
The cymbals you need first
- Hi-hats: a pair of matching cymbals on a stand with a foot pedal. The bottom cymbal is usually a little heavier than the top. They’re used constantly for time-keeping, as in a basic rock beat.
- Crash: a cymbal with a fast attack and a fairly short decay, used for accents and transitions.
- Ride: a larger cymbal for steady patterns, with a clearer ping and a defined bell.
Extras such as splashes (small, quick accents) and chinas (trashy, aggressive sounds) can wait until you know the sounds you need. If you want to see where cymbals sit in the overall kit, see the drum set guide.
Common sizes
Typical ranges are:
- Hi-hats: 13 to 15 inches (14 inches is very common)
- Crash: 14 to 20 inches (16 inches is a common first crash)
- Ride: 19 to 24 inches (20 inches is a common size)
- Splash: 6 to 12 inches
Larger cymbals are generally louder and have longer sustain; smaller ones are quicker and quieter. For a home beginner, mid-range sizes are a good compromise.
Packs versus single cymbals
A cymbal pack bundles hi-hats, a crash and often a ride, and is usually cheaper than buying the same cymbals separately. It’s a practical choice for beginners with a limited budget. The downside is less choice, since you might prefer the hi-hats from one line and a ride from another.
Single cymbals let you choose each one, which is better when you know what you like, but it’s costlier and needs more knowledge.
Many entry-level drum kit packages already include basic cymbals. They may be fine to start with, and many players upgrade them later. Check what’s included before buying separately; see how much drums cost for what to budget for.
Entry-level versus better cymbals
Most major makers offer an entry-level line, a step-up line and professional lines. Entry-level cymbals are typically made from cheaper alloys and are more affordable. They’re perfectly adequate for learning, but can sound harsher or thinner than better cymbals. If you can stretch your budget, a step-up line often gives a noticeable improvement. Better cymbals also usually keep their resale value better than cheap ones.
Bright versus dark
Cymbals tend to be described as bright (higher-pitched, clean, cutting) or dark (lower-pitched, warmer, “trashier”). Bright cymbals are common in pop and rock, and darker cymbals are more common in jazz and some fusion styles, but there’s no fixed rule. Balanced cymbals sit between the two. Listen to several if you can, and pick sounds you enjoy hearing for hours.
Brands
Well-known cymbal makers include Zildjian, Sabian, Meinl and Paiste, along with Istanbul Agop, Istanbul Mehmet and Bosphorus, which make Turkish-style cymbals. Each has beginner lines and higher-end lines. For drum brands, see the major drum brands compared.
Buying used
Used cymbals can be a good way to get better sounds for less. Inspect them for:
- cracks, especially around the edge and bell
- dents or heavy warping
- keyholing, where the center hole has become stretched or torn
If you can, play them before buying, as no two cymbals sound exactly alike.
Care and upgrading
Mount cymbals on felts and sleeves so metal doesn’t touch metal, and avoid overtightening the wing nut so they can swing naturally. Wipe off fingerprints, and be careful with cleaning polish, since it can change the finish. Position them at a sensible height and angle; see how to set up your drum set. Upgrade one cymbal at a time as you work out what your current set is missing.